P4 Comp Format Without Any Input Device
Anything not covered in the other sections like Computer trouble - Hardware Issues - Upgrades and other technical stuff to be asked in here please.
Quick Profile
Information
Posts: 2585
Joined: Mon Apr 26, 2010 6:51 pm View Full Profile
It is normal to get a bluescreen when moving an existing Windows installation to different hardware.
You will want to put the original HAL.dll and ntoskrnl.exe from your windows installer disk onto the drive before you swap it, this will allow the machine to detect a different hard disk controller, as well as other system devices.
See this article: http://support.microsoft.com/kb/249694
If you have swapped the HAL and the problem is still occuring, it might help to know which bluescreen code you are getting.
You will want to put the original HAL.dll and ntoskrnl.exe from your windows installer disk onto the drive before you swap it, this will allow the machine to detect a different hard disk controller, as well as other system devices.
See this article: http://support.microsoft.com/kb/249694
If you have swapped the HAL and the problem is still occuring, it might help to know which bluescreen code you are getting.
Quick Profile
Information
Posts: 2821
Joined: Thu Dec 24, 2009 7:52 pm View Full Profile
Anyone there to help?
Copyright Information
Copyright © Codenstuff.com 2020 - 2023